Wilwood 260-0966 Brake Caliper Pressure Gauge, 0-1500 PSI

Description

2" diameter with a 0-1,500 psi range, Accurate up to 1.5%, 1/4"-28 male threaded adapter fitting included, Gauge is corrosion resistant, 20 PSI graduations
Wilwood 260-0966 Brake Caliper Pressure Gauge, 0-1500 PSI
Sku # 8352600966
Mfr. Part # 260-0966
Condition
New
Brand
Wilwood
Sold
Each
Details
Info
This easy to read brake pressure gauge and adapter fitting from Wilwood allows for quick brake line pressure checks from 0-1,500 PSI. This 2" diameter gauge has 20 PSI graduations, accuracy to 1.5% permits reliable brake bias setup and brake system troubleshooting. This break pressure gauge is corrosion resistant and with a name like Wilwood, you know it's durable.
2" diameter
0-1,500 PSI
20 PSI graduations
Accuracy up to 1.5%
Corrosion resistant
Durable
1/4"-28 male threaded adapter fitting included
Sold each
Specs
Sold in Quantity
Each
GTIN Code
889545066449
MFG. Part #
260-0966
Adapter Fitting
1/4"-28 Male thread
Related Items / Suggested Parts
Wilwood 220-0971 Caliper Pressure Gauge Fitting Adapter
Wilwood 220-0063 Bleeder Screw Assembly, Single
Wilwood 220-7496 Bleed Screw, 1/4-28 Inch, Black
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 70 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues. Untitled Document
Model:
ASTON MARTIN
2012
Year: 2012
Stock Number: 00000595
Odometer: 28890 Miles
VIN: SCFHDDAJ5CAF02415
Color: [BLACK]
Part Comments: OEM 4G43-2450-BG.  WITH STOP LIGHT SWITCH.
ITEM MAY FIT OTHER YEARS AND MODELS. CHECK WITH 74 AUTO OR DEALER PRIOR TO PURCHASE IF UNSURE OF FITMENT. ITEM IS USED AND MAY SHOW SIGNS OF WEAR. INSPECT ALL PICTURES AND ASK ALL QUESTIONS PRIOR TO PURCHASE.
Interchange Information:
also fits the following models:
74 Auto is the nation's largest repairable vehicle dealer!
Questions? Contact us using the eBay Message link above!
Certificate of Limited Warranty
74 Auto LLC Warrants All Parts for 90 Days To The Conditions and Limitations Below
74 Auto LLC is continuously striving to be a leader in the automotive recycling industry. The utmost care is taken in dismantling, testing, and cleaning of the parts you have purchased. If a problem should occur, the following procedure shall apply:
All parts come with a 90-day limited warranty unless otherwise stated.
All engines are warrantied against cracked cylinder blocks or heads, bad cam and crankshafts, and excessive smoking.
The used engine purchased must have new oil and filter
upon installation and every 3,000 miles thereafter, and proof must be maintained
. Oil leaks, such as gaskets and seals, are not covered under warranty, Replace recommended parts, then follow up with the installer to thoroughly check other parts which may have contributed to the original engine failure, Your used engine should begin operation under the same conditions as the original engine. It is recommended that the parts listed below be replaced:
Spark Plugs
Thermostat
Air/Fuel/Oil Filter
PCV Valve
Plug Wires
Water Pump
Oil Cooler/Sending Unit
Fuel Injectors
It is also recommended that you also replace or thoroughly test and inspect the following:
Radiator Cap
All Hoses and Belts
High Tension Wires
On all vehicles with engine oil coolers the engine oil cooler and lines must be inspected and flushed or replaced to protect your warranty.
This warranty does not cover attached items or accessories (such as but not limited to water pump, fuel pump, carburetor, fuel injectors, distributors, computers, etc.)
Transmissions are warrantied to be in good working order against slippage or shifting failures.
Transmissions must have new seals, filter kit & oil installed upon installation into vehicle
. Transmission coolers and lines must be flushed, cleaned and inspected. All sensors, wiring, cables, brackets and/or diagnostics and computer function is the responsibility of the installer. Failure to do so will result in voided warranty.
Vehicles which have 74 Auto LLC engines or transmissions installed must have proper capacity cooling systems and be in good working condition.
Proper oil levels and cooling levels must be maintained at all times for warranty to be valid
.
Warranty is void if heat tabs are melted or removed.
Defective engine or transmission must remain installed until an authorized 74 Auto LLC representative confirms the part defective.
All warranty claims must be presented and approved by an authorized manager of 74 Auto LLC within a period of 90 days from original date of purchase for warranty to be fulfilled.
All warranty work must be done by 74 Auto LLC or an approved shop, or permission to do work must be given by an authorized employee of 74 Auto LLC.
74 Auto LLC, at its option, may either replace the part, repair the part or refund the original purchase price.
Consequential or incidental damage will not be covered under this warranty.
Warranties on any product sold shall be in effect only for the duration of the express warranties contained, herein and upon conclusion of the expressed warranties herein, there shall be no warranties expressed or implied including merchantability, and the fitness for use on the product sold.
This warranty is not transferable and does not cover damage if parts are used in connection with racing purposes, off-road purposes or vehicles equipped with racing equipment, or damage by accident or misuse.
If you are not qualified to perform an installation, do not attempt it. Improper installation will void your warranty.
WARRANTY IS VOID WITHOUT RECEIPT.
25% restocking fee will be charged on all returned parts.
ALL CORES MUST BE ACCOMPANIED BY A RECEIPT.
No cores accepted after 30 days. Cores must be returned complete, including all accessories and hardware sold with the original purchase, unless otherwise stated on the invoice.
74 Auto LLC does not assume responsibility for: towing charges, fluids, refrigerant, fuel, filters, lay up time, lodging, vehicle rental, telephone charges, travel, injury or damage to persons, personal property, commercial loss, normal diagnostic time, loss of revenue or other matters not specifically included.
BROKERED OR ORDERED PARTS, i.e.. ANY PARTS SUPPLIED BY VENDORS OTHER THAN 74 AUTO LLC ARE EXEMPT FROM ALL 74 AUTO LLC PARTS WARRANTIES. SUCH PARTS WILL ONLY CARRY THE SUPPLYING VENDOR WARRANTIES.
ALL COMPUTERS AND ELECTRONIC CONTROLS INCLUDING POWER CONTROL MODULES, RADIOS, AND INSTRUMENT CLUSTERS ARE SOLD AS IS AND ARE NOT RETURNABLE AND/OR REFUNDABLE. THESE PARTS CARRY NO WARRANTY.
Located in Sikeston, MO, 74 Auto LLC is one of the leading repairable/salvage auto dealers in the world. We are innovators in our industry, fast moving and fast growing, we set the bar for our competition. We have built a worldwide client base and have gained the trust of many body shops, exporters, and overseas dealers. As a true volume dealer, we use price and expertise to our advantage. Repeat business is the key to our growth and we strive every single day to do the best job possible for our customers, they are our #1 priority.
With our bulk buying power and network of insurance contracts, we have a wide selection of quality late model repairable vehicles and parts. We have no buyers fees and we will answer every question you ask and send any image you request. Our goal is complete transparency and to provide our buyers with the best vehicles and parts at the lowest prices. If you are a competitive shopper, we will earn your business. For our dealer and body shop customers, we take out the guesswork of auctions and the risk of buying cars with severe hidden damage.